#Shutter stream software download how to

When a message displays that the upgrade is complete, turn the camera off.Д©. Select 'Update' and follow the camera's on-screen menus.Дo not turn the camera off during upgrade.ДЁ. Turn the camera on, press the 'Menu' button, select the SETUP menu and then select 'Firmware Ver'.Д§. The camera from the computer (if using an memory card reader then insert the memory card to the camera)Д¦. Copy only of the firmware files 'A2000201.bin' (A firmware) or 'B2000201.bin' (B firmware) to theДo not copy both files to the card at the same time. Connect the camera to the computer (in MSC Mass Storage USB mode) or use a memory card reader.Д¤. Format an approved memory card in the camera.ДЈ. Download the software from the link below and extract the firmware file 'A2000201.bin' (A firmware) or 'B2000201.bin' (B firmware).Дў. Power the camera from AC adapter unit or use a fully charged battery.ДЎ. Quick guide for download and installing this firmware update The camera's firmware version will be displayed. Press the MENU button and select Firmware version from the setup menu. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.Дў. If the latest firmware versions are already installed on your D200, you need not proceed with download or installation of this Firmware Upgrade.

#Shutter stream software download how to

How to confirm your cameras current firmware version This firmware resolves an issue which, in rare cases, causes the battery indicator to blink whilst shooting regardless of the level of charge in the battery.

Correct operation of your camera is not guaranteed if only A or B of the firmware is upgraded without upgrading the other part. When performing this firmware upgrade, be sure to upgrade both A and B firmware.

This service provides software for upgrading D200 A and B firmware to Ver 2.01.